Get Sidewoven

SIDEWOVEN / GUIDE

Use an Android tablet as a second monitor for Mac or Windows

Use an Android tablet as an extra display for your Mac or Windows desktop with Sidewoven. Keep notes, reference material or a second app on the tablet while your main task stays on the computer. The same setup also works on Android phones.

Last checked:

An example workspace moved to a second display
App view; interface can vary by device and version.

Start with an older tablet

Check the Android version in Settings before reusing an older tablet: versions below Android 8 are unsupported. Start with a lower resolution and 30 FPS, then increase detail for text or frame rate for motion as needed. This lets you check your existing device before buying another monitor.

Cable connected but still on Wi-Fi?

Check that the cable carries data and USB preparation is enabled on the host. Approve Android’s accessory-access prompt; a charge-only connection or denied permission can prevent the USB path. Restart the connection and check transport information in the session menu. A plugged-in cable alone does not prove video is using USB.

Check compatibility

Your phone or tablet needs Android 8 or later. The computer needs macOS 26 or later, or 64-bit Windows 10 version 2004 or later. Android TV has a separate TV setup guide. Meeting the minimum Android version does not mean an older tablet will deliver the same smoothness at every resolution.

Set up a wireless connection

  1. Install Sidewoven on your computer and Android device. Connect both to the same reachable local network.
  2. On Mac, allow Screen Recording. On Windows, complete the required display-driver and local-network setup.
  3. On Android, scan the computer’s QR code, select it from discovery or paste the pairing text. Approve the new-device request on your computer.
  4. Start the second screen and arrange it in your computer’s display settings. Move a window onto the tablet.

Connect Android over USB

Connect a data cable and approve Android’s USB accessory-access prompt. Make sure USB preparation is enabled in the desktop app and select your device if requested. Windows may need a compatible accessory driver. Sidewoven does not require ADB or developer mode for video transport.

Choose the saved computer on Android and start the session. Check the USB transport label in the app. Some devices can show USB permission or mode prompts again during session changes; silent, uninterrupted switching is not guaranteed on every device.

Audio, controls and quality

Pro or an active trial enables audio, mouse-style touch controls and keyboard input on phones and tablets. Mac audio requires the Sidewoven virtual audio driver, and remote control needs Accessibility permission. On Windows, enable the relevant host controls and audio route.

If the connection struggles, lower resolution or FPS. Basic sessions last 10 minutes, with a maximum of 1920×1080 and up to 60 FPS. Actual dimensions and frame rate depend on hardware, aspect ratio and connection conditions.